Friday, June 26, 2020

Mayflower

 

May 2, 2021

Transom window made and mounted.  Two cross piece temporarily installed above window to approximate finished look of transom.  Wale below gunport still to painted black.



April 28, 2021


Progress to date (commentary to be added later)


April 28th - 








April 22nd - 








April 5th - 








Feb, 25th - 



 

Ship Modelling 


Golden Hind

October 23, 2020

 More up-dates on progress.  I stll have three sails to add plus rigging and anchors.  To see a larger image click on it. Click again to return to this page.








 

September 16th, 2020 

Here is a photo of progress as of today.  All spars are mounted and rigging has begun. It is a little awkward to photograph the model because it is so big.  Next to do is make the sails (from a special type of Japanese paper made from mulberry leaves)  The paper will be painted using acrylic paint and touched up with coloured pencil to simulate details (seams etc.)  It's actually starting to look like a sailing ship.  Click on the photo to enlarge, click on it again to return to this page.

 

I've prepared the anchors for mounting from the 'cat heads' - the post sticking out from the hull near the bow just near the little windows in the 'beak' - the structure jutting out from the bow .

 

You may notice that the masts are slanted a bit - this is because they actually were slanted,  'raked' in the proper terminology.  The main mast is raked to the stern a few degrees, the mizzen mast sloped a few more degrees to the stern. The fore mast raked a few degrees toward the bow.  It has something to do with improving performance and weight distribution.


What rigging I've done so far is fixing the pulleys ('blocks' in proper terminology) for some of the 'running rigging'.  Generally speaking, 'running rigging' is the set of ropes used to manipulate the sails, as opposed to 'standing rigging' which provides stability to the masts - the ropes which hold it all together, so to speak.  

 

I've yet to start on the 'standing rigging', which includes the 'shrouds' (which hold the masts in place side-to-side),  and 'stays' (the large ropes which run along the length of the ship to support the masts along the longitudinal axis) - these are the most visually prominent.




 

September 15th, 2020

-- rigging plan that I will be following - though not the same version, I will adapt it.  As usual, click on the image to expand it, click again to come back to this page.







August 13th, 2020

- - progress on the Golden Hinde


 

There is no known visual evidence of what the Golden Hinde actually looked like.  Below is a painting by Mathew Baker, the first methodical Elizabethan shipwright and designer of the 'Revenge' showing the layout and colouring of a typical English 'Race-built' Galleon.


Here is a drawing of what the golden Hinde might have looked like.

 

In the photos below, you can see some extra detail I have added to 'beef-up' the ribs in order to make it more realistic.


   

Below - Parts that came in the box. All are plastic. The sails are vacuum formed and will not be used, but will serve as a pattern for sails that I will make from a special type of paper.  The kit does not include any rigging pulleys (blocks in the proper parlance) and includes a most basic rudimentary and error-ridden rigging diagram.
 
 
from Airfix's catalogue of 1977- 
 
 "Famous in history as the first English ship to sail round the world, the Golden Hind became the symbol of English sea power in the 16th century. Commanded by Sir Francis Drake, the 110-ton ship took three years for the voyage and on arrival back at Plymouth it is recorded she was carrying 30 tons of treasure plundered chiefly from Spanish ships and possessions. This kit is believed to be the most accurate model obtainable of this famous vessel."
 
In reality, no one knows what the Golden Hinde looked like.  The model is typical for a late 16th century 'race-built' English Galleon - ie: low forecastle and stern castle to make the ship more seaworthy, 3 masts, about 120 feet long +/-, colourful.  In fact it was originally named the 'Pelican' but its name was changed during the around the world voyage.  After the round-the-world voyage, the Golden Hind was placed in a dry dock in Deptford (London) and put on public display for 65 years or so.  So great was the fame of the vessel that at least four vessels in the English Fleet of 1588 were named 'Golden Hind'.  (And there was at least one Mayflower - but not THE Mayflower of 1620 Pilgrim fame - the 1620 ship was a different one.)
 
Originally released in 1965, this incarnation was released in 2019.





 -----------------------------------------------------------------------------

 

Below is an article about English ship building in the 1500's and the Spanish Armada.



Dawn of the Gun Ships
 
Angus Konstam 

 

John Hawkins drew on his experience at sea to create a state-of-the-art fighting ship, ultimately crushing the Spanish Armada and securing English dominion of the high seas.
 

The introduction of heavy guns to naval warfare came at a time when innovations in sailing ship technology were creating a type of ship capable of carrying these new weapons. While combining the two technologies wasn’t an easy process, it produced the breakthrough that allowed mariners to conquer new worlds and their royal masters to enrich themselves from the wealth of the Indies or the Americas.

(From Wikipedia - Sir John Hawkins (also spelled Hawkyns) (1532 – 12 November 1595) was a pioneering English naval commander and administrator. He was also a privateer and an early promoter of English involvement in the Atlantic Slave Trade, As Treasurer of the Navy (1578–1595), Hawkins rebuilt older ships and directed design of faster ships that withstood the Spanish Armada in 1588. One of the foremost seamen of 16th-century England, Hawkins was the chief architect of the Elizabethan Navy. In the battle which defeated the Spanish Armada in 1588, Hawkins served as a Vice-Admiral. He was knighted for gallantry. He later devised the naval blockade that intercepted Spanish treasure ships leaving  Mexico and South America. )

While there certainly was a major leap forward in the design of ships during the Renaissance, and the introduction of guns into ships transformed the ability of these ships to fight, these two great developments also led in other directions. The most important of these was probably the establishment of national navies—an institution pioneered by the English and the French. The creation of national fleets also led to the possibility of waging a new kind of war. Rather than just maintaining ships to transport an army across the sea or to raid an enemy coast, the owners of a powerful fleet could attempt to gain control of the seas.


By the later 16th century most ship designers had realized that size wasn’t everything. A more agile warship could run rings around a more lumbering opponent. After all, sailing ships can only fire to the side, so by keeping out of the enemy arc of fire while bringing your own guns to bear, you could outshoot the enemy ship with impunity. This lesson was demonstrated fairly spectacularly during the Spanish Armada campaign, when the Spaniards found themselves outsailed by their English opponents.
 

The popular misconception about the Spanish Armada of 1588 is that the fighting was a David and Goliath affair, where small but nippy English ships were able to run circles around the big lumbering Spanish galleons. Of course the reality was a little different. Many of the Spanish galleons weren’t that big, and some of the English fleet were just as large as the Spanish flagships. However, the veteran English captains knew that in two key areas they held the decisive advantage. First, their ships were better equipped to engage in a gunnery duel than their Spanish rivals. Second, the handful of royal warships that made up the cutting edge of the English fleet were more than a match for any ship in the Spanish Armada. These ships—the so-called “race-built” Elizabethan galleons —were purpose-built to combine speed, maneuverability and firepower. They represented a development of naval warfare—the prototypes of the ships-of-the-line that would dominate the age of fighting sail for more than two centuries.
 

Once John Hawkins returned to England, the “sea dog” had come to two decisions. The first was that war with Spain was inevitable and that he needed to help Elizabeth prepare the Navy Royal for the coming fight. Second, he decided that his experience could be used to help create an improved type of warship— one that would allow the Tudor fleet to hold its own against the Spanish. In 1570 Hawkins entered into partnership with master shipwright Richard Chapman, and together they designed a small, 300-ton galleon called Foresight. She had a 78-foot keel, a 27-foot beam and a length-to-beam ratio of 3:1. The key to her success was the line of her hull below the waterline, which Hawkins had based on the sleek hull lines of the war galley. The superstructure was kept low, sweeping upward from waist to stern, while a long beak and rakish stem were designed to improve her handling in rough seas. Finally, the foremast was placed farther forward than normal and was raked forward slightly, which slightly improved the vessel’s handling.
 

Sea trials showed that Hawkins and Chapman had got their calculations right. She proved easy to handle, she could sail closer into the wind than any other ship in the fleet, and her armament made her the equal of warships twice her size. During these sea trials a few other Hawkins innovations became apparent. The draft of Foresight was deeper than on most other vessels of her size, and this deep hull acted much like a centerboard on a sailing dinghy, a counterbalance to the force of the wind on the sails that greatly reduced her tendency to heel over like the Mary Rose. This made her a very stable gun platform.
 

Just as important, Foresight carried a powerful broadside armament of 28 guns, arrayed on one continuous gun deck. The aptly named Foresight was the ship of the future. Describing her gun deck as “continuous” is a little misleading. The trouble was, the decks of a wooden sailing ship followed the lines of the wales, or the curve of the hull. This meant they sloped upward toward the stern, and underneath the sterncastle the decks became too steep to mount guns on. Hawkins’ solution was to break the run of the gun deck just behind the mizzenmast, stepping it down by half a level. This created a sort of lower mezzanine deck at the stern, which became known as the gunroom. This meant that guns could be carried lower down in the hull than before, and so the center of gravity of the warship was lowered.
 

In effect he had created the closest thing to the perfect sailing “battleship” that the technologies of Tudor England would allow. This new type of vessel would later be dubbed the “race-built galleon,” a term that perfectly captured its sleek, powerful appearance.
 

In 1577 Sir John Hawkins was appointed treasurer of the navy, and for the next decade he took on the job of rebuilding the Tudor fleet using Foresight as his template.
 

On paper the plan looked perfect. All Don Alvaro de Bazán, the Marquis of Santa Cruz, had to do was gather a force of some 150 major ships in Lisbon Harbor, then use them to transport an army of 55,000 men to England. This force would include artillery, engineers and supplies—everything the army needed to fight its way ashore, defeat the English and then march on London. Once it sailed, the armada would form itself into a tight defensive formation, designed to prevent the English from attacking the transports or picking off stray ships. When it reached the beachhead, the army would be carried ashore in 200 specially built landing barges, while a force of 40 galleys and six galleasses would provide the landing ships with fire support. Once the veteran Spanish troops reached dry land, it was assumed they would have little difficulty dealing with the hastily assembled militias raised by Queen Elizabeth of England. However, like so many plans, in so many wars, someone decided to cut a few corners.
 

Unfortunately for him, the Spanish king also asked his foremost general, Alessandro Farense, the Duke of Parma, to submit his own plan. He proposed a landing in Ireland by way of a distraction, and when the English were distracted, he would make a dash across the English Channel from Flanders. In April 1586, Philip reviewed the two schemes with his military advisor Don Juan de Zúñiga. The result was a compromise. Don Alvaro had already begun assembling the ships he needed, but he found that his enterprise had been scaled back to just 100 ships, plus 30 small dispatch vessels. Worse still, instead of embarking the entire invasion force in Spain, he was expected to sail up the English Channel to the coast of Flanders, where he would escort the Duke of Parma’s troops across the narrow waterway to their English beachhead. Thirty-five thousand troops were to launch the invasion, half of who would sail from Spain and the rest from Flanders. What had been a simple plan had been turned into a disjointed and overcomplicated one, a scheme that relied on perfect timing and the cooperation of two commanders a continent apart.
 

The fleet that gathered in Lisbon came from all over Europe—from Spain and Portugal, from Spain’s Mediterranean allies, and it even included neutral ships that had been impounded and commandeered to make up the numbers. For administrative more than tactical reasons it was divided into squadrons, each named after a province. For the most part these squadrons were composed of ships of a particular type. However, once the fighting started, the fleet commanders rearranged their force based on the fighting abilities of the ships. The exception was the Squadron of Portugal— those large and well-armed oceangoing galleons captured in Lisbon harbor in 1580. They were the core of the fleet and stayed at the forefront of the action throughout the armada campaign. Altogether this polyglot armada represented the largest concentration of shipping ever assembled during the Renaissance.
 

Over in England a fleet was gathering too. In 1587 Queen Elizabeth issued a decree that stopped English ships leaving port, and all along the south coast small English merchantmen were being hastily armed with whatever ordnance was available. The problem was that of the 163 private ships that took part, 108 were less than 100 tons burden.
 

Like the Spanish, only a small portion of the English fleet consisted of proper warships. In 1588 the Navy Royal included 21 warships of 200 tons or more, and only four of these had been built in the past 10 years. However, the four exceptions—Revenge, Vanguard, Rainbow and Ark Royal—were “race-built” galleons. Several of the others had been modified, and all carried a greater firepower than their Spanish counterparts. Although these royal warships made up less than a fifth of the entire English fleet, they and the largest of the Spanish galleons would be the ships that would decide the fate of Elizabethan England.
 

The coming battle would be a test between two different approaches to shipbuilding and to the way ships were used in battle. The Spanish commanders learned their trade in the Mediterranean, and their tactics would reflect the way galley fights were organized—which in turn was a maritime version of a battle on land. It would be fought with a center, two wings, a vanguard and a reserve. The aim would be to pin the enemy in a bitterly fought melee, while the rest of the force would concentrate against part of the enemy force, hoping to crush it before help could arrive. This was going to be a brutal fight, fought at close quarters and where cold steel rather than round shot would decide the day. Unfortunately, the English never fought in the Mediterranean, and so they wrote their own rulebook.
 

The different approaches to naval warfare were reflected in the two flagships, which were the center of a frenzy of activity in their home ports of Lisbon and Plymouth. One, a proud Portuguese galleon, would already have stood the test of battle in the sea fight off the Azores six years before. San Martín de Portugal might have begun life as a Portuguese warship, but she was now armed and equipped with Spanish guns, troops and seamen. She represented the ultimate in galleon design—a floating leviathan whose guns could sweep an enemy’s decks before her own troops took the fight to the enemy.
 

The other would be a completely new departure—an English adaptation of the galleon that would combine size with agility, speed with firepower. Unlike her Spanish counterpart, Ark Royal had still not undergone a baptism of fire. These two flagships represented the most powerful warships in either fleet, and the coming clash would be as much a prizefight between these two greatest ships in Europe as a fight between two rival maritime powers.
 

San Martín had an overall length of approximately 150 feet and a beam of 40 feet, which made her considerably leaner than most Spanish galleons of the period. She was a three-masted vessel, and in typical galleon fashion she had a low forecastle with a pronounced beak, while further aft her superstructure sloped gently upward toward her narrow stern. Her length on the waterline was less than 125 feet, which shows the length her towering sterncastle overhung the rudder or how far her beak extended underneath her bowsprit. For all her size she was apparently maneuverable.
 

She was armed with 48 guns, of which just over half were modern bronze muzzle-loading pieces and the rest were swivel guns. While this represented a relatively modern collection of ordnance, compared to larger warships in the English fleet she was seriously undergunned.
 

By contrast, Ark Royal was a floating arsenal. She had been built just two years before at the Royal Shipyard in Deptford, although her building was a private venture. Her owner was Sir Walter Raleigh, the queen’s favorite courtier, commander of her guard, explorer, poet, writer—and one of the most hated men in England.
 

She was originally called Ark Raleigh and was an improved version of the royal warship Revenge, built almost a decade earlier, and an enlarged sister of the 380-ton Rainbow, which Peter Pett was building in the same shipyard. She was listed as being of 550 tons burden, although this tonnage varied considerably from record to record, with an overall length of 140 feet, a beam of 37 feet and a draft of about 15 feet. She carried 50 tons of ordnance—55 guns —a total that probably included 38 large bronze muzzle-loading pieces ranging from demi-cannons to sakers. For the record this small but powerful warship carried four demi-cannons, four cannon perriers (firing stone shot), 12 culverins, 12 demi-culverins and six sakers. Also listed are four port pieces, two fowlers.
 

She also carried up to a dozen more conventional swivel pieces, and her guns were served by 32 gunners, supported by 100 soldiers and 268 mariners, giving her a total complement of 400 men.
[On the Spanish side, all were confident.] After all, even the English had described the great armada as “invincible.” What could possibly go wrong?
 

The answer lay in the black art of gunnery. The Elizabethan sailors enjoyed two major advantages. The first was a qualitative one—they had a larger number of reliable modern guns. The second was all down to tactical doctrine—the Spanish relied on the old-fashioned method of firing a broadside, then boarding the enemy in the smoke. By contrast, the English had developed the ability to keep their distance from the Spanish and to pound their ships with round shot. The coming battle would be a contest between two fighting doctrines as much as a testing ground between the Spanish and English versions of the galleon.
 

Although both the Spanish and the English made good use of the latest bronze muzzle-loading pieces of ordnance, the bulk of the Spanish fleet were still armed in part with obsolete wrought-iron breech-loading guns.
 

Of course the guns were only part of the equation. Although the Spanish had started experimenting with more mobile gun carriages, most of their bronze guns were mounted on two-wheeled carriages—just like the typical gun carriages of the period found on land. The only real difference was that naval carriages tended to be a little shorter, and the wheels were often built from solid pieces of timber rather than being spoked. The carriages used for wrought-iron breech-loading guns were also just like those used half a century before, with heavy wooden beds and mounted on two wheels. This meant that in terms of gun mounting, the Spanish were half a century behind the English.
 

English gun carriages had four small wheels rather than two big ones. The whole carriage sat on two axles, each of which was fitted with small solid wooden wheels called trucks. What was so special about this contraption was that it was perfectly designed for the gun decks of a wooden sailing ship. It took up much less space than the taller two-wheeled carriages used by the Spanish, and the smaller wheels were better able to absorb more of the recoil when the gun was fired. They could be trained and elevated relatively easily or rolled back from the gunport for loading. This was the key. The four truck-wheeled gun carriage could be reloaded in the middle of a battle with relative ease. The Spanish guns couldn’t.
 

Before a Spanish muzzle-loading gun was fired on board a wooden sailing ship, the two-wheeled gun carriage was tied to the side of the ship. In effect the timbers of the ship absorbed the recoil, which placed a huge strain on the hull of the vessel. By contrast the English gun carriages were only loosely secured, so that some of the force of the recoil could be absorbed by the wheels of the carriage scraping across the deck, while a rope secured to the side of the ship prevented the carriage from careering too far back across the gun deck. This also meant that the gun was already pulled back from the side of the ship, ready to be reloaded. Once the gun crew had prepared the gun for firing, all they needed to do was to move it forward to the gunport again. It was simple and straightforward. 

By contrast, in order to reload one of the Spanish guns, it had to be untied from the side of the ship, then rolled backward. The longer carriage made it hard to move the gun around on the gun deck. Once the piece was reloaded, it was then rolled forward and tied to the side of the ship again. Experiments with replica carriages of both types demonstrated that the English system was far faster than the Spanish one, which meant the English were able to keep up a far heavier rate of fire.
 

Worse, the organization of the gun crews on board the Spanish ships made the reloading of the guns all but impossible once a battle had started. Each large gun was commanded by a gunner, assisted by a number of “sea soldiers.” Once the gun was ready for action, these soldiers picked up their pikes, halberds or handguns again and rejoined the rest of their company. It was all a matter of doctrine. The Spanish were geared up to fight a boarding action. The gunners would fire off one big broadside, then the Spanish soldiers would board the English ship before the smoke had cleared.
 

The superiority of the Spanish soldier was legendary—during the late 16th century they were widely regarded as the finest troops in Europe. Once they managed to grapple and board an English ship, then victory was virtually assured.
This Spanish advantage dictated English tactics. By keeping out of close range, the English ships could avoid being boarded, and their advantage in gunnery meant that they would be able to batter the Spanish ships without much risk of any serious return fire.
 

The only time the English came close enough for these obsolete muzzleloaders to be effective was during the final battle of the campaign off Gravelines. However, when the English finally closed to within range, the obsolete breech-loading guns of the Spaniards proved just as effective as the more modern English guns. However, by that time the Spanish Armada was already in serious trouble.
 

[Francis] Drake led the first attack in Revenge, followed in turn by Hawkins in Victory and [Martin] Frobisher in Triumph. At one point all three flagships lay within musket range of San Martín, pouring fire into her at point-blank range. During the next two hours the hull of the Spanish flagship was hit by over 200 round shot, her rigging was badly damaged and her decks were literally awash with blood. The other Spanish ships of Don Alonso Martínez de Leiva’s forlorn hope were equally battered, but somehow all five galleons held the English off and slowly managed to creep northward toward the rest of the fleet.
 

By 9 a.m. Don Alonso had managed to pull the rest of the armada together, and he even managed to create a rearguard. Then, shortly after 10 a.m., the five battered galleons passed through the cordon of the Spanish rearguard and were soon ensconced in the comparative safety of the armada’s defensive box. The English pulled back to regroup, but the respite was only temporary. The battle proper was about to begin. What followed would be a running battle, with the Spanish heading toward the northeast, away from the coast and its treacherous sandbanks. For their part, the English nipped at the edges of the Spanish formation, trying to pull it apart. Drake led his squadron toward the armada’s left, supported by Hawkins’ squadron on his right. Hawkins led his squadron against the armada’s center. Mary Rose was in the thick of the fighting, and an observer on board her later wrote with some detachment, “As soon as we that pursued the fleet were come up within musket shot of them, the fight began very hotly.” He probably wasn’t exaggerating. At close range the English superiority in firepower was really making its mark, and the Spanish ships were literally being shot to pieces.
 

That night the Duke of Medina Sidonia thought he could still renew the battle. He knew that the English must be desperately short of ammunition again, and if he could only hold his ground— and his formation—then he still had a chance of working his way back to Calais or Gravelines. As Tuesday morning dawned, the two fleets lay about two miles apart, some 25 miles northeast of Calais, somewhere to the east of the Goodwin Sands, where the Scottish Sir Andrew Barton had met his end three quarters of a century before. However, morale in the armada was low, and several captains refused to renew the fight. Then the wind changed again—a strong offshore breeze that began driving the battered armada into the North Sea. Whatever else he could do, the Duke of Medina Sidonia was unable to harness wind, tide and the English. He called another council of war, and this time the course was clear. Any rendezvous with Parma’s army was now impossible. The admiral had little choice but to order his fleet to continue on to the north and to head home by circumnavigating the British Isles.
 
Originally published in the December 2008 issue of Military History. 



Wednesday, March 25, 2020

Cromwell Tank

 

 The Cromwell tank, officially Tank, Cruiser, Mk VII, Cromwell (A27M), was one of the series of cruiser tanks fielded by Britain in the Second World War.

 

 This entry will be about the Cromwell tank, and my construction of a 1/48 scale model by Tamiya.   I'll be adding more as I go on.  

 

The kit was a Christmas present from my grandsons Satch and Max.

   

 

Monday March 30th...

 

  April 18th.  Almost done, need to add antennae and apply a clear coat to protect paint finish.


Saturday, March 21, 2020

Q.  What to do when you can't go out -

 

A.  Finish up and old model that's been languishing on the shelf for the past 10 years....

 

(click on the pictures to enlarge)

 

 This is a model of a Curtiss JN4 in 1/48 scale.  Affectionately known as the Curtiss 'Jenny' the JN4 was widely used as a trainer for WW1 allied pilots.  It was said that in a strong headwind they'd actually go backwards.  But they were reliable and easy to repair being almost entirely made of wood.

 

More to come as I continue with repairs and refurbishment.

 

Monday March 30th,  here is the finished product, (at least 10 years after starting)

 

 

 

 

The Canadian Aviation and Space Museum's Curtiss JN4

Thursday, March 19, 2020

  'Corsaire'



(Note - to see a larger image, click on the photo)

The Heller model company's ‘Corsair’ is of a type of vessel in use in the Mediterranean Sea called a ‘tartane’, or ‘tartana’.  A tartane typically had one mast with a large Lateen sail mounted on a long yard at an angle to the main mast. Tartanes were small coastal commercial vessels of about 70 tons used for carrying cargo. This is a model of a tartane that was employed as a privateering vessel by France around 1800.


Contemporary drawing of a 'tartane'



From Heller’s instruction sheet - tartanes, when used by privateers ...“were small, quick, discreet and easy to manoeuvre...they stood a better chance of going un-noticed when commandeering other vessels, carrying out reconnaissance missions, or delivering messages.  ....the hull had no real finesse, revealing its origin as a cargo vessel, but its stern overhanging deck, and its prow, with well crafted naval ram, refined its outline.... this type of vessel all but disappeared toward the middle of the 19th century.”

Characteristics (from Heller instruction sheet)-

Hull length - 24.40 m
Overall length - 33.00 m
Width at the main beam - 6.70 m
Draft at the bow - 2.76 m
Draft at the stern - 3.30 m
Average tonnage - 50 to 70 tonnes

‘Corsairs’ were privateers authorized to raid other countries ships at war with France - the profits were shared between the French government and the ship’s captain.  Because they were authorized by the government, they were considered as legitimate combatants.  They were issued a ‘lettre de marque’ or ‘lettre de course’.  They were expected to conduct themselves according to contemporary admiralty law, and if captured were expected to be treated as prisoners of war, not as pirates.


There are several theories of the origin of the term ‘corsair’ - one being that from the term ‘lettre de corse’ , corsair came to be used as the name for privateers.  There are other theories too - one that it was derived from the Arabic word ‘qarsan’ for ‘pirate’


Privateering was very profitable, as well as disrupting and weakening France’s enemies.     Between the years 1793 to 1800, Lloyd’s of London collected data on shipping losses and it demonstrated British shipping losses to privateers were far greater than losses to the sea - net losses were 3,639 to 2,967.

1/150 Le Corsaire model  (a tartane)






As noted above, this model of the tartane ‘Corsair’ is of one of around 1800.   In addition to the Lateen sail of the main mast, the ‘polacca’ (a fore sail tacked to the bowsprit), a square topsail was added above the main sail. There are less than handful of tartanes in the world today, one being ‘La Flaneuse’ based in the port of Prado in Marseille, France.



La Flaneuse 



More images of 'tartanes'











Tuesday, January 14, 2020

Side-wheel Paddle Steamship


1/140 Scale Plastic model of a Wood-Hulled Paddle Steamer 1857.

This model ship is typical of the small fast steamships used as cutters and packet ships in the 19th Century.  The model was built over a period of two years. 

The hull bottom simulates the copper plating then being used in the 19th century to prevent fouling by barnacles etc.  I used self-adhesive copper tape which I bought at a stained glass supply store.  For this model in addition to the parts supplied I added many single and double pulleys (or in naval parlance -'blocks') and three sails made of 'silkspan' - a light paper reinforced with fine strands of silk typically used as skinning of balsa flying aeroplane models.  I rigged the ship as accurately as I could after many hours researching on the internet.
 The original kit was made in the early 1960's by Lindberg Models of the United States Revenue Cutter (USRC) Harriet Lane. The real ship was built in New York in 1857.  During the U.S. Civil War it was requisitioned by the U.S. Navy.  In 1863 it was captured by the Confederate Navy and employed as a fast blockade runner.  It was re-captured by the north in 1864. 
 Blockade runners were fast steamships which ran cotton to neutral ports in the Caribbean such as Cuba and Bermuda, where the cotton was bought mostly by Great Britain, and the cash used in turn to buy supplies for the war effort. 


Many blockade runners were made in Great Britain, especially Scotland  and were 'state of the art'  One such vessel, the S.S. Thistle was built in Glasgow in 1863 - it had a composite hull of iron frame sheathed in wood.  It was captured by the north in June of 1864 and re-named the U.S.S. Dumbarton.

After the war, in 1868, it was acquired by a new shipping company based out of Quebec City - The Quebec and Gulf Islands Shipping Co.  The ship was re-rigged and re-engined and was used as a mail packet and passenger ship for the St. Lawrence River to Gaspesie, Magdalen Islands, Prince Edward Island,  New Brunswick and Nova Scotia.  It had a collision with another ship, the S.S. Germany, in April of 1870 and sank near Green Island, near Tadoussac Quebec in the St. Lawrence River.



I gave this model a Red Ensign flag on the stern to indicate that this ship is registered to a British/Canadian  company as if it were acquired after the civil war, as many such ships were - see below the S.S. Miarmichi.

Here are some pictures of Paddle Steamers of the U.S. Civil War period...

Above is the A.D. Vance, a particularly successful blockade  runner.

 Above, the Sophia Jane.
 Above, the U.S.S. Fessenden
 Above, the S.S. Miramichi, in 1898 in Charlottetown PEI harbour.

A painting of the U.S.S. Harriet Lane in U.S. Navy colours c. 1863.